Home > Products > AUT3156-0UY-014V
Part #: AUT3156-0UY-014V
LED Bulb, Intermediate Wedge Base, Single Mode (W2.5x16d)
Automotive Turn Signals, Running Lights
Features
- Sale Item (Sale Terms & Conditions)
- Drop in Replacement to Incandescent 3156
- Solid-State, High Shock & Vibration Resistant
- Fast Turn On/Off Time nsec giving drivers following 19 extra feet of stopping distance at 60mph.
- Low Power (Wattage) draw, puts less load on the automotive electrical system, like alternator & battery
- Long Life: Color LEDs: 100,000+ hours
Lumen Maintenance of the White LEDs Is Greater than 70% at 50,000 Hours of Operation.
(Rated Average Life Based on Engineering Testing and Probability Analysis) - Solid-State, High Shock, Vibration Resistance
- Monochromatic Color
- Designed to work in negative ground vehicles
- 40+ Years LEDtronics Design & Manufacturing
- 'Made in USA' option available for qualified volume orders. Contact the factory.
Price: $8.50 each | Min Qty: 1
Specifications
| Description | 12/14Vdc,Sp.Yellow |
|---|---|
| Base Type | Auto Wedge |
| Dimensions | 1.80"Lx1.04"D |
| Color | Super Yellow |
| Wavelength (nm) | 595nm |
| Voltage (V) | 12/14Vdc (Tested@14Vdc) |
| Power (Watts) | 2.08W |
| Current (Amps) | 0.151 A |
| Operating Temp | ~-30°C to ~+50°C |
| Intensity (Candela) | -- cd |
| Lumens | 25.85 lm (Lumen) |
| SCP (Spherical Candela) | 2.06 mscp |
| Viewing Angle | 25° per LED |
| Electrical-Optical Characteristics (Ta = 25°C) | |
Options
- Other Voltages Available: 24V, 28V, 36V, 48V
- Other Bases Available
- Other Colors Available
Caution
- Note:
LED brake/tail lamps may not work with some older thermal flasher units. An LED brake/tail lamp will require
an electronic flasher/blinker unit which is commonly available at your local auto parts store.
Note: Wedge base bulbs are polarity sensitive. If LED bulb fails to light, remove bulb, turn it 180°, and re-insert.
AUT3156-0UY-014 Load Resistor (Sold Separately)
Inline Wiring Schematic
Load Resistor Statement: If installing LED bulbs in your car or motorcycle causes your blinkers to blink fast or causes other electrical problems you may need to install a load resistor to correct these problems. Since LED bulbs draw much less current than standard incandescent bulbs your electrical computer system may think that your bulbs are not working. The AUT-RES-6-50 should resolve these problems. This is a 6 Ohms 50 Watt resistor that needs to be installed in-parallel with your tail/blinker lights, one Load resistor (AUT-RES-6-50) is required for each tail/blinker light.
Caution: This Load Resistor (AUT-RES-6-50) gets extremely hot and needs to be installed correctly. The flat surface of the AUT-RES-6-50 needs to make a good secure contact on a clean flat metal surface on your car or motorcycle. This will act as a heat sink which should keep the Load Resistor (AUT-RES-6-50) cooler. Keep this Load Resistor (AUT-RES-6-50) away from oil, skin, plastic, wires , combustible gases and flammable materials. LEDtronics is not responsible for damage caused to persons or property with installation of the Load Resistor (AUT-RES-6-50).
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov