Part #: LED30MH-600-TPW-001

LED Post Top Lights, for Acorns, Globes, Pendants

Only 27 Watts Replaces Up to 150W Metal Halide or HPS

100 to 277VAC, 5000K Pure White, E39 Mogul Base

Replaces Incandescent/LED:Only 27 Watts Replaces Up to 150W Metal Halide or HPS

  • 5 Year LEDtronics Warranty
  • LEDtronics 5 Year Limited Warranty
  • Up to Over 80% Savings Compared to HID Luminaires
  • Wide Voltage Range: 100-277VAC
  • Ventilated: Lamp Assembly Feature Aids in Maintaining Cool-Running Lamp
  • Optimized Design: LEDs Are Mounted to Provide Maximum Luminance at Desired Angles to the Targeted Area
  • Optimized Circuitry: Power Factor Corrected for Maximum Efficiency
  • Life Expectancy: Based on 12 hrs/day = 11.4 years
  • Long Life: Lumen maintenance of the white LEDs is greater than 70% at 35,000 hours of operation.
  • Instant-On: No Delay in Re-Strike
  • Lab Tested in Accordance with IES Standards
  • Solid-State: High-Shock & High-Vibration Resistant
  • 40+ Years LEDtronics Design & Manufacturing


Spec Sheets

  • Installation Instructions
  • Installation Instructions:
    Installation Instructions

    For best results print pdf files in Adobe Acrobat reader.


    • Washington Globe Street & Walkway Lamps
    • Enclosures


     Base TypeMogul Screw E39 (39.3mm)
     Length12.62 inch [320.5 mm]
     Diameter4.04 inch [102.6 mm]
     ColorTrue White  
     Color Temp4800K to 5200K
     Voltage (V)100~277Vac
     Power (Watts)27 W
     Wattage EquivalentOnly 27 Watts Replaces Up to 150W Metal Halide or HPS
     Current (Amps)0.230 A
     Operating Temp~-30°C to ~+50°C
     Power Factor0.97
     Intensity (Candela)514 cd
     Lumens2542 lm
     Viewing Angle50° beam@45° to vert
    Electrical-Optical Characteristics (Ta = 25°C)  

    Possible Options

    Note: Any ballast that functioned with the replaced lamp needs to be bypassed (Operating Voltage 100-277 VAC)

    When Installing Lamps In Potentially Corrosive Outdoor Environments

    LEDtronics suggests that a silicone moisture-barrier sealant be used to protect the metal-threaded base of the LED bulb.

    Sealant is highly recommended for all outdoor-environment LED bulb installations to prevent water and/or moisture incursion that can lead to premature degradation of the bulb base and eventual bulb failure. This is especially recommended for LED bulb installations near saltwater bodies.

    Dow Corning Molykote 111 Compound (Valve Lubricant and Sealant) is a high-temperature, moisture-resistant, silicone grease. If liberally applied to the clean surface of the lamp socket and the base of the lamp itself, it will provide moisture and corrosion resistance.

    Dow Corning's material spec sheet for Molykote 111 Valve Lube & Sealant

    White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

    LEDtronics Patents
    Utility Patent # US 7,862,204 B
    Utility patent # 8,128,258 B2
    Utility patent # US 8,157,416 B2
    Design Patent # US D631,567 S

    Prop. 65 Warning
    WARNING: This product can expose you to chemicals including Di(2-ethylhexl)pthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

    Contact Us

    Send us an email

    Call Us

    Speak to a customer service representative

    An error has occurred. This application may no longer respond until reloaded. Reload 🗙