Part #: LED48T8KL2-15W-XNW-101WC

LED T8 Tube Lights, 4-Foot, Clear Lens, 15W
Dual Mode (Type A/B): Ballast Ready or
Direct Power Bypass, One or Both End(s)

2-Pin G13 Base, Wide Beam

100 to 277Vac, 4000K Neutral White

  • 5 Year LEDtronics Warranty
  • Installs into 4-Ft Fluorescent T8 ballast-free fixtures that are directly powered at both ends or directly powered at one end (but the lampholder pins are not shunted, no current can pass between the two pins)
  • See Instructions for list of compatible ballasts. See "Caution" for ballast-ready notes.
  • Dual-Pin, G13 Base Ends
  • Energy Savings of up to 50%
  • Lumen Maintenance over 70% @ 50,000+ Hours
  • Even Lighting, No Buzzing, No Flickering
  • Low IR, No UV Radiation, No RF Interference
  • No Toxic Mercury — RoHS Compliant
  • 40+ Years LEDtronics Design & Manufacturing


Choose Options:

Color/Temp Options
Length Options
Ballast Options
Lens Options
Voltage Options

Spec Sheets

  • Installation Instructions
  • Installation Instructions:

    For best results print pdf files in Adobe Acrobat reader.


    • Ceiling Lights in Office, Schools, Hallways
    • Parking Garage, Parking Structure Lighting
    • Production Area, Warehouse Lighting
    • Coolers, Freezers, Vending Machines
    • Retail Store Display Lighting
    • Transportation, Railroad, Buses
    • Undercabinet or Cabinet Lights
    • Light Boxes, Signage Backlighting


     Length48 inch
     ColorNatural White  
     Color Temp4000K
     LensClear PC
     Voltage (V)100~277Vac
     Power (Watts)15 W
     Current (Amps)0.13 A
     Operating Temp~-20°C to ~+55°C, Damp location OK
     Power Factor0.97
     Intensity (Candela)568 cd
     Lumens1891 lm
     Viewing Angle125° ×125°
    Electrical-Optical Characteristics (Ta = 25°C)  

    Possible Options

    • Other Tube Lengths available
    • Other Color Temperatures available
    • Other Voltages available


    • The list of compatible ballasts (with the instructions) is not complete. Test this tube light with your ballast if not listed.
    • Can be directly powered with 100 to 277VAC. If bypassed, a warning label must be visible to prevent the accidental installation of fluorescent tube lights.
    • Not dimmable.
    • Never connect Line and Neutral to the two pins of a shunted tombstone lampholder.
    • ***For Ballast-ready Applications of this lamp:
      1. If the fluorescent ballast does not appear on this list, it does not necessarily mean the model is not compatible with the LEDtronics LEDxxT8KL2 Series T8 lamps. It may just be that the model has not been tested yet.
      2. The LEDtronics tube lamp may not work if the ballast is over 5 years old or have a weak starting voltage.
      3. Please use caution and test lamps in fixtures for an extended period of time to ensure proper operation.
      4. Do not proceed with a mass installation until proper operation of the LEDtronics tube lamp is verified.

    LED tube lamps are patent protected in the US. LEDtronics is a licensed manufacturer under this patent.

    *Only companies such as LEDtronics that are licensed under the U.S. Patent holder are allowed to manufacture, sell or use LED-based replacement light tubes.

    White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

    Prop. 65 Warning
    WARNING: This product can expose you to chemicals including Di(2-ethylhexl)pthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

    Contact Us

    Send us an email

    Call Us

    Speak to a customer service representative

    An error has occurred. This application may no longer respond until reloaded. Reload 🗙