Part #: LEDGX23D-6W-XWW-001AW

LED CFL Replacement Lamps, Rt-angled
6 watts, GX23D (2-pin), Ballast bypass only

Replaces Up to 13W CFLs, Adjustable Base

85 to 277Vac, Up to 65% Energy Savings Over Compact Fluorescent

Replaces Incandescent:Only 6W Replaces Up to 13W CFLs

  • Sale Item (Sale Terms & Conditions)
  • Over 50,000 hr LED. Lumen Maintenance over 70%
  • Direct Replacement with Ballast Bypass
  • Energy Savings of up to 70% over CFLs
  • No Toxic Mercury. RoHS. No Glass
  • High CRI or Color Rendering Index Ra>80
  • Rotating Base Allows changing Light Direction
  • Solid State:High-Shock and High-Vibration Resistant
  • Long Life. Instant Turn On
  • 40+ Years LEDtronics Design & Manufacturing
  • 'Made in USA' option available for qualified volume orders. Contact the factory.


Spec Sheets

  • Installation Instructions
  • Installation Instructions:
    Installation Instructions

    For best results print pdf files in Adobe Acrobat reader.


    • Ceiling Can Lights in Commercial Buildings
    • Down Lights in Offices, Shops, Stores, Homes
    • Wall Sconces & Lanterns
    • Artwork Lighting
    • Step Lighting
    • Display Lighting
    • Accent Lighting


     Base TypeGx23d (2-Pin)
     ColorNatural White  
     Color Temp3800K to 4200K
     Voltage (V)85~277Vac
     Power (Watts)5.5 W
     Wattage EquivalentOnly 6W Replaces Up to 13W CFLs
     Current (Amps)0.048 A
     Operating Temp~-40°C to ~+50°C
     Power Factor0.97
     Intensity (Candela)270 cd
     Lumens732-806 lm
     Viewing Angle115°x120°
    Electrical-Optical Characteristics (Ta = 25°C)  


    • Intended only for installations where the lamp is oriented horizontally, with light beaming downward
    • Ballast bypass required
    • Not intended for totally enclosed fixture
    • Surge protection recommended.

    White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

    GX23 fluorescent bulb socket fixtures have a ballast and/or starter that needs to be bypassed. If the socket has had the ballast bypassed for LED bulbs, then the socket should be labeled for LED bulb use only. (See instructions pdf, blue button.)

    Our LED bulbs are designed for optimum performance in properly vented fixtures. To prevent overheating of the lamp which may cause premature failure of the LEDs, do not install in a totally enclosed fixture. Recessed fixtures with some type of venting are more desirable for use with these lamps.

    These models are for use with standard ON/OFF switches only, not with a dimmer. Use with any type of dimmer, relay or other current/voltage control circuit device will VOID WARRANTY.

    Prop. 65 Warning
    WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit

    Contact Us

    Send us an email

    Call Us

    Speak to a customer service representative

    An error has occurred. This application may no longer respond until reloaded. Reload 🗙