Part #: LEDRK00DL-045W-XDW-101WD

LED Retrofit Kit: Roadway / High Bay / Flood, Dimmable

45 Watts Replace MH, HPS Up to 150W — Yoke Mounting

100-277VAC — 120° Beam — 5000K Daylight White — ETL Listed

Replaces Incandescent/LED:45 Watts Replace MH, HPS Up to 150W -- Yoke Mounting

  • 5 Year LEDtronics Warranty
  • Energy Savings of up to 70% over HID Lamps
  • Lumen Maintenance over 75% @ 50,000+ Hours
  • Replaces MH & HPS E39 Mogul Based Lamps Inside Downlights, Flood Lights, High Bay, Wall Packs and Roadway Cobraheads
  • Dimmable 0-10VDC, 0-100KΩ Potentiometer, or 10V Pulse-Width Modulation (PWM)
  • High Lumen, High Efficacy
  • Wide-Angle Light Distribution
  • No UV/IR Radiation, No Toxic Metals, RoHS Compliant
  • UL/cUL Approved Mean Well Driver
  • LM79 & LM80 Reports Available
  • 40+ Years LEDtronics Design & Manufacturing


Choose Options:

Color Temperature Options
Power (nominal) Options
Voltage Options

Spec Sheets

  • Installation Instructions
  • Installation Instructions:

    For best results print pdf files in Adobe Acrobat reader.


    • Replaces Existing HID Lamps without Changing Fixture
    • Low Bay Lighting: Factories, Warehouses, Indoor Arenas, Convention Centers, Stadiums
    • Shoeboxes: Parking Lots, Depots
    • Downlights
    • Wall Packs
    • Area Floodlights, Security Lighting
    • Wall Washing
    • Driveway & Walkway Lighting


     Base TypeGX24q (4-Pin)
     ColorNatural White  
     Color Temp4000 to 4500K
     LensFrosted White Polycarbonate
     Voltage (V)100~277Vac
     Power (Watts)10.5 W
     Operating Temp-40°C to +50°C
     Power Factor1
     Intensity (Candela)95 cd
     Lumens900 lm
     Viewing Angle360° Omnidirectional
    Electrical-Optical Characteristics (Ta = 25°C)  

    Possible Options

    • Other White Color Temperatures
    • Higher and Lower Wattages Available
    • Non-Dimming Versions Available
    • Higher Voltages Available
    • Retrofit E39 Lamps with E39 Dead Socket Mounting Support Holder (LEDRK0-E39-001)
    • Retrofit E26 Lamps with E26 Dead Socket Mounting Support Holder (LEDRK0-E26-001)

    Accessory (Sold Separately)


    • Any Reflectors Inside the Retrofitted Housing that Functioned with the Replaced Lighting Technology Must be Removed to Free Up Circulating Air. Failure to Remove Reflectors Will Void the Warranty
    • Housing's Weatherproof Quality Determines IP Rating
    • For Fixtures with Adequate Ventilation with Ambient Temperature Not Exceeding Kit's Maximum
    • Housing should provide at least 82 cubic inch minimum cavity size to allow air circulation.

    Prop. 65 Warning
    WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit

    Contact Us

    Send us an email

    Call Us

    Speak to a customer service representative

    An error has occurred. This application may no longer respond until reloaded. Reload 🗙