Part #: LEDRK01DL-150W-XWW-201WD

LED Retrofit Kit: Roadway / Low Bay / Flood, Dimmable,
Higher Voltages

154 Watts Replace MH, HPS Up to 400W-600W — Yoke Mounting

200-480VAC — 120° Beam — 5000K Daylight White — ETL Listed

Replaces Incandescent/LED:154 Watts Replace MH, HPS Up to 400W-600W -- Yoke Mounting

Features
  • 5 Year LEDtronics Warranty
  • Energy Savings of up to 70% over HID Lamps
  • Lumen Maintenance over 70% @ 70,000+ Hours
  • Wide-Angle Light Distribution
  • Dimmable 0-10VDC, 0-100KΩ Potentiometer or 10V Pulse-Width Modulation (PWM)
  • UL/cUL Approved Mean Well Driver
  • High Lumen, High Efficacy, No Glare
  • Solid State: Shock & Vibration Resistant
  • No UV/IR Radiation, No RF Interference, No Heat
  • No Toxic Metals, RoHS Compliant
  • LM79 & LM80 Reports Available
  • 40+ Years LEDtronics Design & Manufacturing

 

Choose Options:

Color Temperature Options
Power (nominal) Options
Voltage Options

Spec Sheets






  • Installation Instructions
  • Installation Instructions:




    For best results print pdf files in Adobe Acrobat reader.

    Applications

    • Replaces Existing HID Lamps without Changing Fixture
    • High Bay Lighting: Factories, Warehouses, Indoor Arenas, Convention Centers
    • Shoeboxes: Parking Lots, Depots
    • Roadways & Streetlights, Parks
    • Area Floodlights, Security Lighting
    • Canopy Lights, Wall Washing
    • Driveway & Walkway Lighting

    Specifications

     ColorNatural White  
     Color Temp4100K
     Voltage (V)200~480Vac
    (Tested@277Vac)
     Power (Watts)149.9 W
     Current (Amps)0.56 A @ 277VAC
     Operating Temp~-30°C to ~+50°C
     Efficacy106.08
     Intensity (Candela)6056 cd
     Lumens15902 lm
     CRI83.3
     Viewing Angle120°x120°
     Weight (approx)5.27 lbs. [2.39 kg]
    Electrical-Optical Characteristics (Ta = 25°C)  

    Possible Options

    • Other White Color Temperatures
    • Higher and Lower Wattages Available
    • Non-Dimming Versions Available
    • Higher Voltages Available

    Accessory (Sold Separately)

    Caution

    • Any Reflectors Inside the Retrofitted Housing that Functioned with the Replaced Lighting Technology Must be Removed to Free Up Circulating Air. Failure to Remove Reflectors Will Void the Warranty
    • Housing's Weatherproof Quality Determines IP Rating
    • For Fixtures with Adequate Ventilation with Ambient Temperature Not Exceeding Kit's Maximum
    • Housing should provide at least 274 cubic inch minimum cavity size to allow air circulation.

    Prop. 65 Warning
    WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov

    Contact Us

    Send us an email

    Call Us

    Speak to a customer service representative

    An error has occurred. This application may no longer respond until reloaded. Reload 🗙